Add to Cart
OD 120mm-200mm Tungsten Carbide Conical Scoring Saw Blade for Wood Cutting
Product Description
The KWS conical scoring saw blade is designed for customers who are afraid of viscous rubber and fear of rust. New increased chrome plating process, new CP technology and surface anti-rusted treatment can effectively reduce the friction between the saw blade and workpiece. The slternate inverted triple chip tooth design ensures sharp and smooth cutting and prevents the bottom side from bursting. The cutting width of the scoring saw blade must be identical to cutting width of the main saw to ensure the cutting quality of the bottom side. It is mainly used for pre-grooving of veneer materials such as MDF and fireproof board. Suitable for precision table saw, horizontal panel saw that allow vertical adjustment refer to the main saw kerf.
Product Superiority
1. Low cutting resistance, high efficiency
2. High cutting precision, smooth cut surface
3. Preventing lower edge explosion
Specificaiton
No. | D | d | B | Z | TF |
1 | 120 | 20/22 | 3.0-4.0 | 24 | W |
2 | 125 | 22 | 3.4-4.4 | 24 | W |
3 | 150 | 30 | 3.1-4.1 | 36 | W |
4 | 160 | 25.4 | 3.1-4.1 | 36 | W |
5 | 160 | 25.4/30 | 3.4-4.4 | 36 | W |
6 | 160 | 30 | 3.4-4.4 | 40 | W |
7 | 160 | 45 | 4.3-5.3 | 40 | W |
8 | 160 | 55 | 3.4-4.4 | 40 | W |
9 | 180 | 25.4 | 3.4-4.4 | 36 | W |
10 | 180 | 30 | 4.4-5.4 | 40 | W |
11 | 180 | 30 | 3.9-4.9 | 36 | W |
12 | 180 | 30 | 3.4-4.4 | 40 | W |
13 | 180 | 45 | 4.3-5.3 | 40 | W |
14 | 180 | 45 | 4.7-5.7 | 40 | W |
15 | 200 | 45/75 | 4.3-5.3 | 40 | W |
Note
1. D=Outer Diameter, d=Inner Diameter, B=Cutting Width, Z=No. of Tooth, TF=Tooth Feature.
2. Other specifications can be made according to customers' requirements.
Product Photos